Category: Design

Posted on
by

Architectural design is typically carried out with little or no environmental consideration integral to the process. Once the design has reached a certain stage environmental considerations – whether material toxicity, water conservation, carbon emissions or energy conservation or something else – are then assessed. At this point decisions are made to revise and iterate the design for better environmental outcomes or to add ‘environmental features’. We know the results of this disjointed design process and we know this has to change if buildings are going to be better for people and the planet!

Unfortunately many environmental standards reinforce this process in two ways. Firstly by being separate from the design process, often as an assessment procedure. Secondly by requiring ‘environmental features’ be added in order to score points or increase the rating of the design.

The Passivhaus Standard is different. Unlike most environmental standards for architecture, design is central to the Passivhaus Standard. And the Passivhaus Standard is central to the design process.

Design is a reason to Love Passivhaus!

017 Love Passivhaus Design
Continue reading →

Posted on
by

This blog post is a review of “PHPP Illustrated: A Designer’s Companion to the Passive House Planning Package” published in October 2014. Sarah Lewis, architect and Certified European Passivhaus Designer wrote this delightful and chunky volume.

The Passive House Planning Package (PHPP) can seem like a monster spreadsheet at 30+ worksheets (tabs). And the last thing most architects would consider a ‘design tool’. However, once architects understand passivhaus and start to design passivhaus buildings, they quickly realise that the passivhaus spreadsheet PHPP is an essential element of the design process. For without the PHPP there would be no passivhaus buildings as Dr Wolfgang Feist writes in the foreword:

Behind the success of the [Passivhaus] Standard lies the Passive House Planning Package (PHPP), the Passive House energy balance and design tool. A tool of proven accuracy and demonstrated reliability in predicting building energy consumption…

The next step up is to gain enough understanding and fluency with the PHPP to fully integrate it as a passivhaus design tool. And that is where the strength of this book lies for passivhaus architects.

Sarah guides the reader towards fluency with the passivhaus spreadsheet PHPP using three key tools throughout the book:

  • Common mistakes
  • Drawings and annotated screenshots
  • “The Flow Chart” (as seen on the cover)

Camden Passivhaus, the first certified passivhaus building in London UK, is used throughout the book to give real-world context each step of the way. It is also a seminal bere:architects passivhaus project and one that Sarah worked on previously while as a Director of the practice.

An unfamiliar tool can appear as an obstacle to design. Once understood and put into practice it can powerfully inform and support design decision making.

015 Passivhaus Spreadsheet PHPP Design Tool
Continue reading →

Posted on
by

Climate change is one of the biggest threats we face today, as I wrote in a previous blog about ‘Zero-Carbon Buildings’. Clearly we need to reduce CO2 emissions globally to zero, or to less than zero, to address climate change. We need to approach this in two ways: radical energy efficiency to reduce demand and de-carbonisation of energy generation, in other words, a massive scaling-up of renewable energy generation.*

In some situations these two approaches are going to manifest as ‘Zero-Carbon Buildings’ or ‘Net-Zero Energy Buildings’. Even though there are many reasons why this is the wrong target (and if you read the comments you’ll find there are more than just the 9 reasons I wrote about.)

What then, is the best approach to achieving these notional targets of ‘Zero-Carbon Buildings’ or ‘Net-Zero Energy Buildings’?

Passivhaus First is the best approach and I explore why in this blog.

014 Zero Carbon Buidings Passivhaus First
Continue reading →

Posted on
by

As the EU moves towards ‘Near Zero Energy Buildings‘ and the UK moves towards implementing this by requiring ‘Zero Carbon Buildings’, understanding the Passivhaus Standard as one reliable route towards delivering ‘Zero Carbon Buildings’ is vital.

Passivhaus is known as the world’s leading building energy efficiency standard. It is also a comfort standard with stringent indoor thermal comfort and ventilation requirements. The majority of industry discussion around passivhaus focuses on the technical details and energy benchmarks required to meet the standard. While this is understandable as we come to grips with the challenges of delivering buildings to such a high standard, there is less attention paid to the benefits delivered by the standard and wider aspects of the passivhaus design process.

11 Passivhaus Pointers
Continue reading →

Posted on
by

I was first introduced to Passivhaus several year back when we decided to pursue it in the architect’s practice where I work. It seemed like the right step forward in so many ways. However, learning about the Passivhaus Standard and everything that is required for certification, presented many challenges. There were some technical challenges, but probably the biggest challenges were to the received wisdom that I held firmly onto at the time.

This somewhat tongue-in-cheek post explores some of those mindset challenges with the benefit of hindsight. It also explores some other mindset challenges that arise from delivering passivhaus architecture.

010 10 Things I hate About Passivhaus

Continue reading →