Tag: Comfort

Posted on
by

integrity
/ɪnˈtɛɡrɪti/
noun
1. the quality of being honest and having strong moral principles.
2.the state of being whole and undivided.

Breaking promises damages your integrity. Do you make promises about the performance of buildings you design or construct? And do your buildings keep those promises?

Let me share a short story with you.

On a commission where I was the project architect, we reassured our clients that their new building would be super energy efficient, among other things. And yet, once the building had been handed over, I found myself in an embarrassing situation.

In a meeting with the clients, they put me on the spot and asked me why the energy bills were so high. No matter how many times I explained that the new building was much larger than their old building and had a lot more energy consuming equipment in it, there was no way out: in the clients’ mind we had not delivered on the promise of a super energy efficient building.

In fact, the new building was very energy efficient. However, we had never quantified what we meant by a “super energy efficient” new building. Therefore, the clients’ interpretation of this was lower energy bills and all they had to compare were the energy bills from their old building.

Needless to say, this project wasn’t a certified passivhaus building. Had it been, we could have given the clients an accurate prediction of what the (radically low) energy consumption would be. They would have had a good estimate of the expected energy bills. And the building would have performed as predicted. Our promise would have been kept.

Integrity is a reason to Love Passivhaus!

018 Love Passivhaus Integrity
Continue reading →

Posted on
by

Architectural design is typically carried out with little or no environmental consideration integral to the process. Once the design has reached a certain stage environmental considerations – whether material toxicity, water conservation, carbon emissions or energy conservation or something else – are then assessed. At this point decisions are made to revise and iterate the design for better environmental outcomes or to add ‘environmental features’. We know the results of this disjointed design process and we know this has to change if buildings are going to be better for people and the planet!

Unfortunately many environmental standards reinforce this process in two ways. Firstly by being separate from the design process, often as an assessment procedure. Secondly by requiring ‘environmental features’ be added in order to score points or increase the rating of the design.

The Passivhaus Standard is different. Unlike most environmental standards for architecture, design is central to the Passivhaus Standard. And the Passivhaus Standard is central to the design process.

Design is a reason to Love Passivhaus!

017 Love Passivhaus Design
Continue reading →

Posted on
by

This blog post is a review of “PHPP Illustrated: A Designer’s Companion to the Passive House Planning Package” published in October 2014. Sarah Lewis, architect and Certified European Passivhaus Designer wrote this delightful and chunky volume.

The Passive House Planning Package (PHPP) can seem like a monster spreadsheet at 30+ worksheets (tabs). And the last thing most architects would consider a ‘design tool’. However, once architects understand passivhaus and start to design passivhaus buildings, they quickly realise that the passivhaus spreadsheet PHPP is an essential element of the design process. For without the PHPP there would be no passivhaus buildings as Dr Wolfgang Feist writes in the foreword:

Behind the success of the [Passivhaus] Standard lies the Passive House Planning Package (PHPP), the Passive House energy balance and design tool. A tool of proven accuracy and demonstrated reliability in predicting building energy consumption…

The next step up is to gain enough understanding and fluency with the PHPP to fully integrate it as a passivhaus design tool. And that is where the strength of this book lies for passivhaus architects.

Sarah guides the reader towards fluency with the passivhaus spreadsheet PHPP using three key tools throughout the book:

  • Common mistakes
  • Drawings and annotated screenshots
  • “The Flow Chart” (as seen on the cover)

Camden Passivhaus, the first certified passivhaus building in London UK, is used throughout the book to give real-world context each step of the way. It is also a seminal bere:architects passivhaus project and one that Sarah worked on previously while as a Director of the practice.

An unfamiliar tool can appear as an obstacle to design. Once understood and put into practice it can powerfully inform and support design decision making.

015 Passivhaus Spreadsheet PHPP Design Tool
Continue reading →

Posted on
by

Climate change is one of the biggest threats we face today, as I wrote in a previous blog about ‘Zero-Carbon Buildings’. Clearly we need to reduce CO2 emissions globally to zero, or to less than zero, to address climate change. We need to approach this in two ways: radical energy efficiency to reduce demand and de-carbonisation of energy generation, in other words, a massive scaling-up of renewable energy generation.*

In some situations these two approaches are going to manifest as ‘Zero-Carbon Buildings’ or ‘Net-Zero Energy Buildings’. Even though there are many reasons why this is the wrong target (and if you read the comments you’ll find there are more than just the 9 reasons I wrote about.)

What then, is the best approach to achieving these notional targets of ‘Zero-Carbon Buildings’ or ‘Net-Zero Energy Buildings’?

Passivhaus First is the best approach and I explore why in this blog.

014 Zero Carbon Buidings Passivhaus First
Continue reading →

Posted on
by

As the EU moves towards ‘Near Zero Energy Buildings‘ and the UK moves towards implementing this by requiring ‘Zero Carbon Buildings’, understanding the Passivhaus Standard as one reliable route towards delivering ‘Zero Carbon Buildings’ is vital.

Passivhaus is known as the world’s leading building energy efficiency standard. It is also a comfort standard with stringent indoor thermal comfort and ventilation requirements. The majority of industry discussion around passivhaus focuses on the technical details and energy benchmarks required to meet the standard. While this is understandable as we come to grips with the challenges of delivering buildings to such a high standard, there is less attention paid to the benefits delivered by the standard and wider aspects of the passivhaus design process.

11 Passivhaus Pointers
Continue reading →