In many parts of the world, we take it for granted that we have access to clean air. Or at least we think we do. As we improve the quality of our homes and other buildings, we are starting to get a more realistic picture of what we are breathing in along with our supposed clean air.

Air pollution has a significant and pervasive impact on public health. According to the World Health Organization, it is now considered “the world’s largest single environmental health risk,” with more than three million people dying every year as a result. This is more than twice the number of people that die in vehicle accidents each year.

Is your ‘clean air’ really clean and healthy?

051 Passivhaus Bioweapon Defence
Continue reading

The first thing you read about Passivhaus is often the set of technical requirements and performance metrics. It’s got to be airtight. No thermal bridges are allowed. 15kWh/m2.a, 10W/m2, 120kWh/m2.a, 0.6 ach. . . But these figures don’t help you understand how to design a Passivhaus building. These figures don’t tell you what is different about designing a Passivhaus building to designing any other building.

Passivhaus might be the world’s most stringent and fastest growing building energy efficiency standard, but does it work in urban locations? Must a Passivhaus building strictly face south?

This post is a simple and brief introduction to 5 things to know about Passivhaus before you get into the technical requirements:

  1. Integrated Design
  2. Location
  3. Orientation
  4. Form
  5. Construction System

Once you have a grasp of these 5 things, then you’ll be in a good place to start digging deeper into what is required for Passivhaus.
Continue reading

This blog post is a review of “Hyperlocalization of Architecture: Contemporary Sustainable Archetypes” published in 2015. This book is written by Andrew Michler and published by eVolo.

You may know of Andrew Michler from his writing on Inhabitat, prior to that, he was a builder. He is a certified Passivhaus Consultant and has designed and built his own foam-free off-grid Passivhaus home in the Colorado Rocky Mountains.

The book starts with two bold (but accurate, I would argue) assertions about modern architecture;

A majority of buildings have failed on the most basic level of interacting with the place and people they aspire to serve.

and

The principle of modern design was severed from the realities of a building as an environmental intervention by relying on technology to overcome conditions rather than adapt to them.

From this starting point, “Hyperlocalization of Architecture: Contemporary Sustainable Archetypes” launches into a global journey to seek out contemporary vernacular architecture. In other words, buildings that embody an attitude of hyperlocalization. Buildings that stand in direct contrast to the asserted failings of modern architecture.

The book is a joyous and lavishly illustrated romp from the US to Australia with stop -offs along the way in Japan, Germany, Denmark, Spain and Mexico. As you might expect, the stop-off in Germany focusses on a stunning example of Passivhaus architecture.

Each location has an essay by Andrew Michler followed by a selection of building profiles. Each building is documented with multiple superb colour photographs, the majority of which are by Andrew Michler. Sometimes there are also drawings and diagrams, and in all cases, there is a written narrative by the architect.

Hyperlocalization of Architecture: Contemporary Sustainable Archetypes” is a beautiful written and visual source guide for contemporary vernacular architecture across the globe.

The Place of Passivhaus in Contemporary Vernacular Architecture

Continue reading

Passivhaus is known as the world’s leading energy efficiency standard for buildings. It drives building energy consumption down as much as 90% compared to code requirements.

Passivhaus requires that the whole delivery team pay very close attention to how a building is designed, detailed and constructed. Energy must be used efficiently and not wasted. Very detailed energy and performance modeling must be carried out using the PHPP during the design process.

This can seem complicated and technical, on top of all the other challenges of being an Architect. So why not leave it to the ‘sustainability experts’ who love this kind of thing?

It is true, Passivhaus does take effort. It’s simple but not easy. However, Passivhaus offers important opportunities for architects.

Here are three reasons you should get into Passivhaus: Climate Change, legislation, and to make a difference.

048 Architect get into Passivhaus

Continue reading

Passivhaus overheating shouldn’t happen: it’s one of the criteria of the international Passivhaus standard.

Even so, people sometimes ignore this requirement during the early stages of the design process.

It shouldn’t be ignored. Overheating is a key design issue and should be addressed from the beginning as an integral part of the Passivhaus design process.

But how?

This blog post is a simple guide to preventing Passivhaus overheating by design.

047 Passivhaus Overheating Design

Continue reading